23.1. Complex Functions and Function Complexities

Exit and Return

exit status

Functions return a value, called an exit status. The exit status may be explicitly specified by a return statement, otherwise it is the exit status of the last command in the function (0 if successful, and a non-zero error code if not). This exit status may be used in the script by referencing it as $?. This mechanism effectively permits script functions to have a "return value" similar to C functions.

return

Terminates a function. A return command [1] optionally takes an integer argument, which is returned to the calling script as the "exit status" of the function, and this exit status is assigned to the variable $?.

Example 23-7. Maximum of two numbers

#!/bin/bash # max.sh: Maximum of two integers. E_PARAM_ERR=250 # If less than 2 params passed to function. EQUAL=251 # Return value if both params equal. # Error values out of range of any #+ params that might be fed to the function. max2 () # Returns larger of two numbers. { # Note: numbers compared must be less than 257. if [ -z "$2" ] then return $E_PARAM_ERR fi if [ "$1" -eq "$2" ] then return $EQUAL else if [ "$1" -gt "$2" ] then return $1 else return $2 fi fi } max2 33 34 return_val=$? if [ "$return_val" -eq $E_PARAM_ERR ] then echo "Need to pass two parameters to the function." elif [ "$return_val" -eq $EQUAL ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi exit 0 # Exercise (easy): # --------------- # Convert this to an interactive script, #+ that is, have the script ask for input (two numbers).

For a function to return a string or array, use a dedicated variable. count_lines_in_etc_passwd() { [[ -r /etc/passwd ]] && REPLY=$(echo $(wc -l < /etc/passwd)) # If /etc/passwd is readable, set REPLY to line count. # Returns both a parameter value and status information. # The 'echo' seems unnecessary, but . . . #+ it removes excess whitespace from the output. } if count_lines_in_etc_passwd then echo "There are $REPLY lines in /etc/passwd." else echo "Cannot count lines in /etc/passwd." fi # Thanks, S.C.

Example 23-8. Converting numbers to Roman numerals

#!/bin/bash # Arabic number to Roman numeral conversion # Range: 0 - 200 # It's crude, but it works. # Extending the range and otherwise improving the script is left as an exercise. # Usage: roman number-to-convert LIMIT=200 E_ARG_ERR=65 E_OUT_OF_RANGE=66 if [ -z "$1" ] then echo "Usage: `basename $0` number-to-convert" exit $E_ARG_ERR fi num=$1 if [ "$num" -gt $LIMIT ] then echo "Out of range!" exit $E_OUT_OF_RANGE fi to_roman () # Must declare function before first call to it. { number=$1 factor=$2 rchar=$3 let "remainder = number - factor" while [ "$remainder" -ge 0 ] do echo -n $rchar let "number -= factor" let "remainder = number - factor" done return $number # Exercises: # --------- # 1) Explain how this function works. # Hint: division by successive subtraction. # 2) Extend to range of the function. # Hint: use "echo" and command-substitution capture. } to_roman $num 100 C num=$? to_roman $num 90 LXXXX num=$? to_roman $num 50 L num=$? to_roman $num 40 XL num=$? to_roman $num 10 X num=$? to_roman $num 9 IX num=$? to_roman $num 5 V num=$? to_roman $num 4 IV num=$? to_roman $num 1 I # Successive calls to conversion function! # Is this really necessary??? Can it be simplified? echo exit

See also Example 10-28.

The largest positive integer a function can return is 255. The return command is closely tied to the concept of exit status, which accounts for this particular limitation. Fortunately, there are various workarounds for those situations requiring a large integer return value from a function. Example 23-9. Testing large return values in a function #!/bin/bash # return-test.sh # The largest positive value a function can return is 255. return_test () # Returns whatever passed to it. { return $1 } return_test 27 # o.k. echo $? # Returns 27. return_test 255 # Still o.k. echo $? # Returns 255. return_test 257 # Error! echo $? # Returns 1 (return code for miscellaneous error). # ====================================================== return_test -151896 # Do large negative numbers work? echo $? # Will this return -151896? # No! It returns 168. # Version of Bash before 2.05b permitted #+ large negative integer return values. # Newer versions of Bash plug this loophole. # This may break older scripts. # Caution! # ====================================================== exit 0 A workaround for obtaining large integer "return values" is to simply assign the "return value" to a global variable. Return_Val= # Global variable to hold oversize return value of function. alt_return_test () { fvar=$1 Return_Val=$fvar return # Returns 0 (success). } alt_return_test 1 echo $? # 0 echo "return value = $Return_Val" # 1 alt_return_test 256 echo "return value = $Return_Val" # 256 alt_return_test 257 echo "return value = $Return_Val" # 257 alt_return_test 25701 echo "return value = $Return_Val" #25701 A more elegant method is to have the function echo its "return value to stdout," and then capture it by command substitution. See the discussion of this in Section 33.8. Example 23-10. Comparing two large integers #!/bin/bash # max2.sh: Maximum of two LARGE integers. # This is the previous "max.sh" example, #+ modified to permit comparing large integers. EQUAL=0 # Return value if both params equal. E_PARAM_ERR=-99999 # Not enough params passed to function. # ^^^^^^ Out of range of any params that might be passed. max2 () # "Returns" larger of two numbers. { if [ -z "$2" ] then echo $E_PARAM_ERR return fi if [ "$1" -eq "$2" ] then echo $EQUAL return else if [ "$1" -gt "$2" ] then retval=$1 else retval=$2 fi fi echo $retval # Echoes (to stdout), rather than returning value. # Why? } return_val=$(max2 33001 33997) # ^^^^ Function name # ^^^^^ ^^^^^ Params passed # This is actually a form of command substitution: #+ treating a function as if it were a command, #+ and assigning the stdout of the function to the variable "return_val." # ========================= OUTPUT ======================== if [ "$return_val" -eq "$E_PARAM_ERR" ] then echo "Error in parameters passed to comparison function!" elif [ "$return_val" -eq "$EQUAL" ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi # ========================================================= exit 0 # Exercises: # --------- # 1) Find a more elegant way of testing #+ the parameters passed to the function. # 2) Simplify the if/then structure at "OUTPUT." # 3) Rewrite the script to take input from command-line parameters. Here is another example of capturing a function "return value." Understanding it requires some knowledge of awk. month_length () # Takes month number as an argument. { # Returns number of days in month. monthD="31 28 31 30 31 30 31 31 30 31 30 31" # Declare as local? echo "$monthD" | awk '{ print $'"${1}"' }' # Tricky. # ^^^^^^^^^ # Parameter passed to function ($1 -- month number), then to awk. # Awk sees this as "print $1 . . . print $12" (depending on month number) # Template for passing a parameter to embedded awk script: # $'"${script_parameter}"' # Needs error checking for correct parameter range (1-12) #+ and for February in leap year. } # ---------------------------------------------- # Usage example: month=4 # April, for example (4th month). days_in=$(month_length $month) echo $days_in # 30 # ---------------------------------------------- See also Example A-7 and Example A-39. Exercise: Using what we have just learned, extend the previous Roman numerals example to accept arbitrarily large input.

Redirection

Redirecting the stdin of a function

A function is essentially a code block, which means its stdin can be redirected (as in Example 3-1).

Example 23-11. Real name from username

#!/bin/bash # realname.sh # # From username, gets "real name" from /etc/passwd. ARGCOUNT=1 # Expect one arg. E_WRONGARGS=65 file=/etc/passwd pattern=$1 if [ $# -ne "$ARGCOUNT" ] then echo "Usage: `basename $0` USERNAME" exit $E_WRONGARGS fi file_excerpt () # Scan file for pattern, { #+ then print relevant portion of line. while read line # "while" does not necessarily need [ condition ] do echo "$line" | grep $1 | awk -F":" '{ print $5 }' # Have awk use ":" delimiter. done } <$file # Redirect into function's stdin. file_excerpt $pattern # Yes, this entire script could be reduced to # grep PATTERN /etc/passwd | awk -F":" '{ print $5 }' # or # awk -F: '/PATTERN/ {print $5}' # or # awk -F: '($1 == "username") { print $5 }' # real name from username # However, it might not be as instructive. exit 0

There is an alternate, and perhaps less confusing method of redirecting a function's stdin. This involves redirecting the stdin to an embedded bracketed code block within the function.

# Instead of: Function () { ... } < file # Try this: Function () { { ... } < file } # Similarly, Function () # This works. { { echo $* } | tr a b } Function () # This doesn't work. { echo $* } | tr a b # A nested code block is mandatory here. # Thanks, S.C.

Emmanuel Rouat's sample bashrc file contains some instructive examples of functions.