[Войти] [Зарегистрироваться]

Наши друзья и партнеры


Lines Club

Ищем достойных соперников.

Книги по Linux (с отзывами читателей)

Библиотека сайта rus-linux.net

3.2. Prerequisites - BIOS, Boot Options, Partitioning

3.2.1. BIOS

When starting a fresh installation you should try with standard BIOS options. If something doesn't work you should try to modify BIOS options. For example a well known trouble maker is the Plug-and-Play - PnP option (which comes with different names). See also the BIOS section in the hardware section below.

3.2.2. Boot Options

There are many boot options, which have effects on the behavior of laptops, e.g. apm=on|off and acpi=on|off: For details see BootPrompt-HOWTO and the Kernel documentation in /usr/src/linux/Documentation/kernel-parameters.txt .

3.2.3. Partitioning

Partitioning can be done in a very sophisticated way. Currently I have only some first thoughts. I assume that with laptops there are still some reasons (e.g. updating the firmware of PCMCIA cards and BIOS) to share Linux and Windows9x/NT. Depending on your needs and the features of your laptop you could create the following partitions:

  • BIOS, some current BIOSes use a separate partition, for instance COMPAQ notebooks

  • suspend to disk, some laptops support this feature

  • swap space Linux

  • swap space Windows9x/NT

  • Linux base

  • Linux /home for personal data (please consider an encrypted partition for security reasons, for details about encryption see the according chapter below)

  • common data between Linux and Windows9x/NT

  • small (~32MB) boot partition for yaBoot (Linux/PPC boot loader), in HFS MacOS Standard format.

Note this chapter isn't exhausting yet. Please read the appropriate HOWTOs first, e.g. the Partition-HOWTO .

Эта статья еще не оценивалась
Вы сможете оценить статью и оставить комментарий, если войдете или зарегистрируетесь.
Только зарегистрированные пользователи могут оценивать и комментировать статьи.

Комментарии отсутствуют